View 5062MTH1R_7318012.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

a-22 apem www.apem.com 5000 series t oggle switches distinctive features a the widest range in miniature switches ? 17 actuators including toggles, paddle levers and locking levers in different lengths. ? 5 contact materials from dry circuit to 6a 125vac and high inrush up to 120a 2 ms. ? 8 functions including maintained and momentary versions. ? 1 to 4 pole configurations. ? 12 terminal types including 9 for pc board mounting. other types include quick-connect and wire-wrap. ? 6 bushing styles from 6 (.236) plain to 11,9 (15/32) threaded. ? 3 types of finish including military black. ? 4 approvals (ul - csa - vde - cecc) and 3 listings. ? 4 types of sealing for terminal or front panel requirements. ? numerous accessories available for actuator and bushing options.
apem www.apem.com a-23 5000 series to ggle switches specifications a materials ?case : diallylphthalate (dap) or high temperature plastic material (ul94-v0) ? ctuator : brass, chrome plated bushing : brass, nickel plated ?housing : stainless steel or steel tin plated ?contacts a : silver ad : silver, gold plated cd : brass, gold plated x814 : for peak currrents, see section g. ?terminal seal : epoxy paddles : ul94hb polyamide ?lever caps : vinyl electrical specifications ?current/voltage rating with resistive load : contact maximum minimum level* silver (a) 3a 250vac - 6a 125vac - 4a 30vdc 50ma 10vdc iii and iv silver, 3a 250vac - 6a 125 vac - 4a 30vdc 10ma 50mv i to iv gold plated (ad) gold plating withstands up to 100ma 30vdc 10? 5v brass, 0,4 va at 20vac or dc 10ma 50mv i and ii gold plated (cd) 10? 5v ?for inductive, lamp or capacitive load, consult factory. * for details, see technical information, end of catalogue. ?initial contact resistance : 10 m ? max. ?insulation resistance : 1.000 m ? min. at 500vdc ?dielectric strength : 1.000 vrms 50 hz min. between terminals 1.500 vrms 50 hz min. between poles 1.500 vrms 50 hz min. between terminals and frame ?contact bounce : 2 ms max. ?electrical life at full load : 50.000 cycles for single and double pole 40.000 cycles for 3 pole 30.000 cycles for 4 pole ?low level or mechanical life : 100.000 cycles general specifications ?torque : 1,25 nm (.922 ft.lb) max. applied to nut ?panel thickness : 2,5 mm (.098) with 2 nuts - 4 mm (.157) with 1 nut ?operating temperature : -40? to +85? agency approvals / preferential lists for vde, refer to 55000 series. qpl (europe only) muahag nato a vailability : consult factory for details of approved models. marking : to order switches marked ul, csa or cecc, complete appropriate box of ordering format. preferential lists do not appear on the switches. cecc 96201-007 en 61058-1
a-24 apem www.apem.com 5000 series t oggle switches overview a 5 series te rm inals and bushing 0 straight pc terminals, 5,08 (.200) terminal spacing, with 6,35 (1/4) threaded bushing 1 straight pc or quick-connect terminals, 4,70 (.185) terminal spacing, with 6 (.236) threaded bushing. 2 straight pc terminals, 4,70 (.185) terminal spacing, right angle, quick-connect or wire wrap terminals, with 6,35 (1/4) threaded bushing 3 straight pc terminals, 4 (.157) terminal spacing, with 6 (.236) threaded bushing 4 straight pc terminals, 4 (.157) terminal spacing or right angle terminals , with 6,35 (1/4) threaded bushing 5 solder lug terminals, with 6 (.236) threaded bushing. 6 solder lug terminals, with 6,35 (1/4) or 11,9 (15/32) threaded bushing. 7 solder lug terminals, with 6,35 (1/4) flatted bushing. 9 straight pc or quick-connect terminals, with 6,35 (1/4) flatted bushing, 4,70 (.185) terminal spacing. number of poles 3 single pole 4 double pole 5 three pole 6 four pole electrical functions 6 on - on 9 on off on 7 mom off mom 8 on off mom 2 on - mom 4 on on on on on mom mom on mom function 4 must not have blank in "connections" box. . must not have blank in "momentary" box. connections for function 4 th standard ct reversed see wiring diagrams end of section b. . for functions 4, 4-1r, 4-2r. leave blank for all other functions. momentary for function 4 1r on on mom 2r mom on mom leave blank for other functions. te r minals blank solder lugs or straight pc depending on model m solder lugs with 11,9 (15/32) bushing (5600 switches) miwr wire wrap (for 5200 switches only) w right angle, horizontal mounting (5200 - 5400 switches) ww right angle, vertical mounting (5200 - 5400 switches) y ] y4 ] bracket mounting (5200 switches) y6 ] y7 ] z quick connect (5200 - 5100 - 5900 switches) about this series on the following pages, you will find successively : - model structure of switches with threaded bushing - model structure of switches with plain bushing - options in the same order as in above chart dimensions : first dimensions are in mm while inches are shown as bracketted numbers. notice : please note that not all combinations of above numbers are available. refer to the following pages for further information.
apem www.apem.com a-25 5000 series to ggle switches overview a sealing boots are available. they are presented in section h. mounting accessories : standard hardware supplied with all models with 6,35 (1/4) or 6 (.236) threaded bushing : 2 hex nuts 8 mm (.314) across flats, 1 locking ring and 1 lockwasher. standard and special hardware available are presented in section i. packaging unit : 25 pieces or 50 pieces depending on models. finish blank bright chrome finish g matt black finish on bushing, actuator and hardware. fluorescent tip blank none 0.38 white fluorescent tip to lever a vailable with matt black finish (g) only. special options blank no special requirement x408 front panel sealing by two o-rings x404 horizontal right angle with reduced overall dimensions other : specific bushing height, pc terminal length, finish, ratings, etc... see following pages. caps and paddles caps length u270 11 (.433) u1710 7,3 (.287) paddles u240n 12,4 (.488) u290n 20 (.787) u390n 21,5 (.846) contact materials a silver ad silver, gold plated cd brass, gold plated for peak currents, see x814, under special options. sealing blank no sealing except where standard b epoxy sealed terminals k front panel sealing by one o-ring and sealing washer sealing by two o-rings, see x408 under "special options" . levers length with threaded plain bushing bushing -13 (std ) 10,5 (.413) 13,5 (.531) -2 16 (.629) 19 (.748) -7 - 6,6 (.259) -8 (flat) 21,3 (.838) - -9 (flat) 11,4 (.448) - -12 (flat ) 6,3 (.248) - -16 5,5 (.216) 8,5 (.334) -17 7 (.275) 10 (.393) -21 (+ u640) 21,3 (.838) - insulated -22 21,3 (.838) - -23 14 (.551) - -24 (large) 17,5 (.688) - -25 16,30 (.642) -27 (large) 11,7 (.460) - -4n 9 (.354) 12 (.472) 4n for use with paddle actuators only. approvals ul csa vde cecc a vailability : consult factory for details of approved models. locking levers 1v 1 locked position 2v 2 locked positions 3v 3 locked positions other, consult factory. for models with 6,35 (1/4) bushing.
a-26 apem www.apem.com 5000 series t oggle switches - solder lug terminals threaded bushing 6,35 (1/4) : 5600 a single pole double pole three pole model structure iii ii i 2-3 1-2 5636 on - on 5639 on off on 5637 mom off mom 5638 on off mom 5632 on - mom iii ii i 2-3 1-2 5-6 4-5 5646 on - on 5649 on off on 5647 mom off mom 5648 on off mom 5642 on - mom 5644* on on on 5644 1r* on on mom 5644 2r* mom on mom iii ii i 2-3 1-2 5-6 4-5 8-9 7-8 5656 on - on 5659 on off on 5657 mom off mom 5658 on off mom 5652 on - mom 1, 2, 3 and 4 pole configurations shown with standard lever (-13) ? keyway ? keyway ? keyway * function 4 : sp in dp case - specify ct or th connections, see end of catalogue. ? keyway 1 2 3 (.070) (.043) (.145) (.074) 3.70 1.90 1.80 1.10 (.039) 1.00 10.50 (.413) (.314) 8.00 (.031) 0.80 (.019) 0.50 24? (.118 dia) 3.00 (.070) 1.80 (.519) 13.20 7.00 (.275) (.185) 4.70 (.472) 12.00 (.145) 3.70 (1/4-40uns) 6.35-40uns i ii iii 3 2 1 13.20 (.519) 24? 3.00 (.118 dia) 1.80 4.75 (.070) (.187) 4.70 (.185) 0.80 (.031) 8.00 (.314) (.413) 10.50 3.70 (.145) 0.50 (.019) 12.00 (.472) 1.00 (.039) 6.35-40uns (1/4-40uns) (.472) 12.00 iii iii ii i 1 2 36 5 4 24? (.519) 13.20 (.118 dia) 3.00 (.070) 1.80 10.50 (.413) (.314) 8.00 (.039) 1.00 (.019) 0.50 (.031) 0.80 (.145) 3.70 (.516) 13.10 (1/4-40uns) 6.35-40uns (.649) 16.50 (.187) 4.75 iii ii i 3 2 1 7 8 9 (.185) 4.70
apem www.apem.com a-27 5000 series t oggle switches - solder lug terminals threaded bushing 6,35 (1/4) : 5600 a four pole iii ii i 2-3 1-2 5-6 4-5 8-9 7-8 11-12 10-11 5666 on - on 5669 on off on 5667 mom off mom 5668 on off mom 5662 on - mom 5664* on on on 5664 1r* on on mom 5664 2r* mom on mom *function 4 : dp in 4p case - specify ct or th connections, see end of catalogue. p anel cut - out with k with x408 standard sealing option sealing option ? keyway 13.20 1.80 3.00 (.519) (.070) (.118 dia) 3.70 (.145) 0.80 (.031) 0.50 (.019) 13.10 (.516) 1.00 (.039) 8.00 (.314) (.413) 10.50 (1/4-40uns) 6.35-40uns (.834) 21.20 (.187) 4.75 24? iii ii i 4.70 (.185) 12 11 10 7 8 9 (.204) (.255 dia) (.086 dia) (.043) (.106) 6.50 2.20 5.20 2.70 1.10 6.50 (.255 dia) 6.50 (.255 dia) 2.70 (.106)
a-28 apem www.apem.com 5000 series t oggle switches - solder lug terminals a 5700 models ?flatted bushing 6,35 mm (1/4) 1, 2, 3 and 4 pole configurations for model structure numbers, refer to 5600 models and replace 6 with 7. p anel cut - out standard or with k sealing option diagram as per 5600 model model structure 5500 models ?threaded bushing 6 mm (.236) 1, 2, 3 and 4 pole configurations diagram as per 5600 model p anel cut - out standard with x408 sealing option for model structure numbers, refer to 5600 models and replace 6 with 5. model structure (.106) 2.70 (.255 dia) 6.50 (.244 dia) (.100) (.244) 6.20 6.20 2.55 2.20 (.086 dia) 6.20 (.244 dia)
apem www.apem.com a-29 5000 series t oggle switches - solder lug terminals threaded bushing 11,9 (15/32) : 5600m a single pole double pole three pole 1, 2, 3 and 4 pole configurations ?supplied with 2 hex nuts and 1 locking ring ?panel thickness up to 6 mm (.236) iii ii i 2-3 1-2 5636m on - on 5639m on off on 5637m mom off mom 5638m on off mom 5632m on - mom iii ii i 2-3 1-2 5-6 4-5 5646m on - on 5649m on off on 5647m mom off mom 5648m on off mom 5642m on - mom 5644m* on on on 5644m 1r* on on mom 5644m 2r* mom on mom iii ii i 2-3 1-2 5-6 4-5 8-9 7-8 5656m on - on 5659m on off on 5657m mom off mom 5658m on off mom 5652m on - mom model structure shown with standard lever (-24) * function 4 : sp in dp case - specify ct or th connections, see end of catalogue. ? keyway ? keyway ? keyway ? keyway 1 2 3 (.070) (.043) (.145) (.074) 3.70 1.90 1.80 1.10 (.031) 0.80 (.019) 0.50 (.070) 1.80 (.185) 4.70 (.145) 3.70 24? (.433) (.468) (.688) (.196 dia) (15/32-32uns) 13.20 (.519) (.275) 7.00 11.9-32uns 17.50 11.00 11.90 5.00 iii ii i 3 2 1 1.80 4.75 (.070) (.187) 4.70 (.185) 11.90 11.00 17.50 (.688) (.468) (.433) 24? 3.70 (.145) 0.50 (.019) 0.80 (.031) (.519) 13.20 12.00 (.472) 5.00 11.9-32uns (15/32-32uns) (.196 dia) iii ii i 1 2 3 6 5 4 (.070) 1.80 (.019) 0.50 (.031) 0.80 (.145) 3.70 (.187) 4.75 24? (.468) (.688) 17.50 11.90 (.476) 16.50 (.649) 12.10 5.00 11.9-32uns (15/32-32uns) (.196 dia) i ii iii 3 2 1 13.20 (.519) 7 8 9 (.185) 4.70
a-30 apem www.apem.com 5000 series t oggle switches - solder lug terminals threaded bushing 11,9 (15/32) : 5600m a four pole iii ii i 2-3 1-2 5-6 4-5 8-9 7-8 11-12 10-11 5666m on - on 5669m on off on 5667m mom off mom 5668m on off mom 5662m on - mom 5664m* on on on 5664m 1r* on on mom 5664m 2r* mom on mom p anel cut - out standard with k sealing option *function 4 : dp in 4p case - specify ct or th connections, see end of catalogue. ? keyway other : m bushing can be combined with other types such as : 5200, z, miwr... consult factory. (.377) (.200) (.066) (.492 dia) (.137 dia) 12.50 9.60 3.50 5.10 1.70 12.50 (.492 dia) 1.80 (.070) (.187) 4.75 5.00 11.9-32uns (15/32-32uns) (.196 dia) 12.10 (.476) 11.90 17.50 (.688) (.468) 24? 3.70 (.145) 0.80 (.031) 0.50 (.019) 21.20 (.834) i ii iii (.519) 13.20 1 2 3 4.70 (.185) 12 11 10
apem www.apem.com a-31 5000 series t oggle switches - straight pc terminals threaded bushing 6,35 (1/4) : 5200 a single pole double pole three pole ? te rm inal spacing 4,7 mm (.185) 1, 2, 3 and 4 pole configurations ?epoxy sealed terminals standard for new projects, we recommend switches with support bracket (option y) which holds the switch securely on the pcb. other terminal lengths presented under "special options". also available with plain bushing, see "special options" x371 iii ii i 2-3 1-2 5236 b on - on 5239 b on off on 5237 b mom off mom 5238 b on off mom 5232 b on - mom iii ii i 2-3 1-2 5-6 4-5 5246 b on - on 5249 b on off on 5247 b mom off mom 5248 b on off mom 5242 b on - mom 5244 b* on on on 5244 1r b* on on mom 5244 2r b* mom on mom iii ii i 2-3 1-2 5-6 4-5 8-9 7-8 5256 b on - on 5259 b on off on 5257 b mom off mom 5258 b on off mom 5252 b on - mom model structure shown with standard lever (-13) ? keyway ? keyway ? keyway *function 4 : sp in dp case - specify ct or th connections, see end of catalogue. ? keyway 1 2 3 1.10 (.043) 4.00 5.30 (.157) (.208) 13.20 (.519) 24 12.00 (.472) 3.00 (.118 dia) 4.75 (.187) 8.00 (.314) (.413) 10.50 1.00 (.039) 6.35-40uns (1/4-40uns) 4.00 (.157) 0.50 (.019) 0.80 (.031) 13.30 (.523) 1.10 (.043) 4.70 1.60 (.063 dia) (.185) (.187) 4.75 iii ii i 1 2 3 4.70 (.185) 6 5 4 epoxy (.039) 1.00 10.50 (.413) (.314) 8.00 (.031) 0.80 (.019) 0.50 24 (.118 dia) 3.00 (.519) 13.20 7.00 (.275) (.185) 4.70 (1/4-40uns) 6.35-40uns (.523) (.157) 13.30 4.00 (.043) 1.10 (.185) (.063 dia) 1.60 4.70 i ii iii 3 2 1 epoxy (.519) 13.20 (.118 dia) 3.00 (.187) 4.75 16.50 (.649) 10.50 (.413) (.314) 8.00 (.039) 1.00 (1/4-40uns) 6.35-40uns (.031) 0.80 (.019) 0.50 (.157) 4.00 (.567) 14.40 (.043) 1.10 (.185) 4.70 (.187) 4.75 (.063 dia) 1.60 24 iii ii i 3 2 1 7 8 9 (.185) 4.70 epoxy
a-32 apem www.apem.com 5000 series t oggle switches - straight pc terminals threaded bushing 6,35 (1/4) : 5200 - 5000 a te r minal spacing 5,08 (.200) - single and double pole four pole iii ii i 2-3 1-2 5-6 4-5 8-9 7-8 11-12 10-11 5266 b on - on 5269 b on off on 5267 b mom off mom 5268 b on off mom 5262 b on - mom 5264 b* on on on 5264 1r b* on on mom 5264 2r b* mom on mom 5000 models te rm inal spacing 5,08 mm (.200) ?epoxy sealed terminals standard ? and 2 pole configurations diagram as per 5200 model iii ii i 2-3 1-2 5-6 4-5 single pole double pole 5036 5046 on - on 5039 5049 on off on 5037 5047 mom off mom 5038 5048 on off mom 5032 5042 on - mom 5044* on on on 5044 1r* on on mom 5044 2r* mom on mom *function 4 : dp in 4p case - specify ct ot th connections, see end of catalogue. model structure p anel cut - out 5200 - 5000 - 5400 standard with k sealing option shown with standard lever (-13) ? keyway ? keyway *function 4 : sp in dp case - specify ct or th connections, see end of catalogue. (.255 dia) 6.50 1.10 2.70 5.20 2.20 6.50 (.106) (.043) (.086 dia) (.255 dia) (.204) 21.20 13.20 3.00 (.834) (.519) 4.75 (.187) (.118 dia) 8.00 (.314) (.413) 10.50 (1/4-40uns) 6.35-40uns 14.40 (.567) 4.00 (.157) (.019) 1.00 (.039) 0.80 (.031) (.043) 1.10 4.70 (.185) (.187) 4.75 1.60 (.063 dia) 0.50 24 iii ii i 4.70 (.185) 12 11 10 8 7 9 epoxy 0.60 (.023) (.216) (.171) 5.50 4.35 6.35-40uns (1/4-40uns) 3.00 (.118 dia) 10.50 (.413) (.314) 8.00 24? (.515) (.171) (.200) 13.10 4.35 5.08 (.023) 0.60 (.023) 0.60 (.023) 0.60 (.039) 1.00 (.519) (.275) (.472) 12.00 13.20 7.00 (.200) (.200) 5.08 5.08 (.043 dia) 5.08 (.200) 1.10 epoxy 13 2 iii ii i
apem www.apem.com a-33 5000 series t oggle switches - straight pc terminals a diagram, as per 5200 model 5400 models ?threaded bushing 6,35 mm (1/4) ?terminal spacing 4 mm (.157) 1, 2, 3 and 4 pole configurations for model structure numbers, refer to 5200 models and replace 2 with 4. panel cut-out, see 5200. 5900 models ?flatted bushing 6,35 mm (1/4) ?terminal spacing 4,7 mm (.185) 1, 2, 3 and 4 pole configurations for model structure numbers, refer to 5200 models and replace 2 with 9. p anel cut - out standard or with k sealing option model structure model structure ? flat 1 2 3 (.106) 2.70 (.255 dia) 6.50
a-34 apem www.apem.com 5000 series t oggle switches - straight pc terminals a 5100 models ?threaded bushing 6 mm (.236) ?terminal spacing 4,7 mm (.185) 1, 2, 3 and 4 pole configurations for model structure numbers, refer to 5200 models and replace 2 with 1. diagram, as per 5200 model 5300 models ?threaded bushing 6 mm (.236) ?terminal spacing 4 mm (.157) 1, 2, 3 and 4 pole configurations diagram, as per 5200 model for model structure numbers, refer to 5200 models and replace 2 with 3. p anel cut - out 5100 - 5300 standard with x408 sealing option model structure panel cut-out, see below. model structure (.244 dia) (.100) (.244) 6.20 6.20 2.55 2.20 (.086 dia) 6.20 (.244 dia)
apem www.apem.com a-35 5000 series t oggle switches - quick-connect terminals threaded bushing 6,35 (1/4) : 5200z a double pole single pole ?terminal spacing 4,7 mm (.185) ?epoxy sealed terminals standard 1and 2 pole configurations *function 4 : sp in dp case - specify ct or th connections, see end of catalogue. model structure iii ii i 2-3 1-2 5236z on - on 5239z on off on 5237z mom off mom 5238z on off mom 5232z on - mom iii ii i 2-3 1-2 5-6 4-5 5246z on - on 5249z on off on 5247z mom off mom 5248z on off mom 5242z on - mom 5244z* on on on 5244z 1r* on on mom 5244z 2r* mom on mom p anel cut - out with k with x408 standard sealing option sealing option shown with standard lever (-13) ? keyway ? keyway ? keyway 1 2 3 (.255) (.208) (.061) 6.50 5.30 1.57 (.204) (.255 dia) (.086 dia) (.043) (.106) 6.50 2.20 5.20 2.70 1.10 6.50 (.255 dia) 6.50 (.255 dia) 2.70 (.106) (.519) 13.20 7.00 (.275) 1.00 (.039) 13.10 (.515) 24? 8.00 (.314) (.413) 10.50 0.78 4.70 5.30 (.208) (.030) (.185) 1.57 (.061) epoxy 12 3 i ii iii 6.35-40uns (1/4-40uns) (.118 dia) 3.00 3.00 (.118 dia) (1/4-40uns) 6.35-40uns 13.20 (.519) 12.00 (.472) 10.50 (.413) (.314) 8.00 24? (.515) 13.10 (.039) 1.00 (.185) (.030) (.187) (.208) 5.30 4.70 0.78 4.75 (.061) 1.57 epoxy 12 3 i ii iii
a-36 apem www.apem.com 5000 series t oggle switches - quick-connect terminals a 5900z models ? flatted bushing 6,35 mm (1/4) ?terminal spacing 4,7 mm (.185) ?epoxy sealed terminals standard 1and 2 pole configurations for model structure numbers, refer to 5200z models and replace 2 with 9. p anel cut - out standard or with k sealing option 5100z models threaded bushing 6 mm (.236) ?terminal spacing 4,7 mm (.185) ?epoxy sealed terminals standard 1and 2 pole configurations for model structure numbers, refer to 5200z models and replace 2 with 1. p anel cut - out standard diagram, as per 5900 model diagram, as per 5200 model model structure model structure (.106) 2.70 (.255 dia) 6.50 (.086 dia) 2.20 6.20 6.20 (.244) (.244 dia)
apem www.apem.com a-37 5000 series t oggle switches - wire-wrap terminals threaded bushing 6,35 (1/4) : 5200miwr a te r minal spacing 5,08 (.200) - double pole te rm inal spacing 5,08 (.200) - single pole ?terminal spacing 5,08 mm (.200) ?epoxy sealed terminals standard 1and 2 pole configurations ?can also be used as extended pcb terminals *function 4 : sp in dp case - specify ct or th connections, see end of catalogue. iii ii i 2-3 1-2 5236miwr on - on 5239miwr on off on 5237miwr mom off mom 5238miwr on off mom 5232miwr on - mom iii ii i 2-3 1-2 5-6 4-5 5246miwr on - on 5249miwr on off on 5247miwr mom off mom 5248miwr on off mom 5242miwr on - mom 5244 miwr* on on on 5244 1r miwr* on on mom 5244 2r miwr* mom on mom model structure p anel cut - out with k with x408 standard sealing option sealing option shown with standard lever (-13) ? keyway ? keyway ? keyway 1 2 3 (.708) (.665) (.023) 18.00 16.90 0.60 1.10 (.043 dia) (.200) 5.08 10.50 (.413) (.314) 8.00 24? (.515) 13.10 (.023) 0.60 (.039) 1.00 0.60 (.023) (.665) 16.90 (.275) 7.00 (.519) (.200) 5.08 13.20 epoxy 12 3 iii ii i 3.00 (.118 dia) (1/4-40uns) 6.35-40uns 1.00 (.039) 0.60 (.023) 0.60 (.023) 5.08 13.10 (.200) (.515) 24? 8.00 (.314) (.413) 10.50 5.08 5.08 (.200) (.200) (.472) 12.00 (.519) 13.20 (.043 dia) 1.10 6.35-40uns (1/4-40uns) (.118 dia) 3.00 (.665) 16.90 epoxy 3 2 1 iii ii i (.204) (.255 dia) (.086 dia) (.043) (.106) 6.50 2.20 5.20 2.70 1.10 6.50 (.255 dia) 6.50 (.255 dia) 2.70 (.106)
a-38 apem www.apem.com 5000 series t oggle switches - plain bushing right angle terminals - horizontal : 5200w a three pole double pole single pole ?terminal spacing 4,7 mm (.185) 1, 2 and 3 pole configurations special switch 5200wx404 with reduced overall dimensions is presented under "special options". iii ii i 2-3 1-2 5236w on - on 5239w on off on 5237w mom off mom 5238w on off mom 5232w on - mom iii ii i 2-3 1-2 5-6 4-5 5246w on - on 5249w on off on 5247w mom off mom 5248w on off mom 5242w on - mom 5244w* on on on 5244w 1r* on on mom 5244w 2r* mom on mom iii ii i 2-3 1-2 5-6 4-5 8-9 7-8 5256w on - on 5259w on off on 5257w mom off mom 5258w on off mom 5252w on - mom model structure shown with standard lever (-13) *function 4 : sp in dp case - specify ct or th connections, see end of catalogue. 11.00 (.433) 6.00 13.50 (.236) (.531) 3.00 6.25 (.246 dia) (.118 dia) 3.70 (.145) 4.70 (.185) 5.08 (.200) 0.50 0.80 (.019) (.031) 12.70 5.08 (.500) (.200) 4.70 (.185) (.275) 7.00 (.519) 13.20 24? 7.40 12.70 (.500) (.291) i ii iii 1.60 (.062 dia) 1.10 (.043) (.039) 1.00 1 2 3 (.291) (.500) (.150) (.118 dia) (.200) (.185) (.531) (.472) (.236) (.031) 0.50 (.246 dia) (.145) (.200) (.500) (.150) 3.70 13.50 6.00 12.00 5.08 3.81 12.70 7.40 4.70 6.25 3.00 0.80 (.019) 5.08 12.70 3.81 (.433) 11.00 24? 13.20 (.519) 4.70 (.185) iii ii i 1.60 (.062 dia) 1.10 (.043) (.039) 1.00 1 2 3 4 6 3.00 6.25 (.246 dia) (.118 dia) (.150) (.564) (.283) 7.20 14.35 3.81 (.236) (.492) (.531) (.653) (.145) (.043) (.519) 13.20 3.70 13.50 6.00 12.5 16.60 1.10 3.81 14.35 5.08 (.150) (.564) (.196) (.185) 4.70 (.031) 0.80 (.062 dia) 1.60 (.185) (.019) 0.50 4.70 iii ii i (.039) 1.00 4 5 6 24? 7 9 5.08 (.200)
apem www.apem.com a-39 5000 series t oggle switches - plain bushing right angle terminals - horizontal : 5400w a pcb mounting for 5200w 5400w models ?terminal spacing 4 mm (.157) 1and 2 pole configurations diagram, as per 5200w model pc layout for model structure numbers, refer to 5200w single and double pole and replace 2 with 4. model structure (.653) (.472) (.275) (.326) (.236) (.137) 3.50 7.00 6.00 12.00 8.30 16.60 sp dp 3p (.062 dia) 1.60 (.157) 4.00 (.200) (.500) 5.08 12.70 (.062 dia) 1.60 4.00 (.157) 3.81 12.70 5.08 (.150) (.500) (.200) sp dp
a-40 apem www.apem.com 5000 series t oggle switches - plain bushing right angle terminals - vertical : 5200ww a three pole double pole single pole ?pin spacing 3,81 mm (.150) 1, 2, 3 and 4 pole configurations iii ii i 2-3 1-2 5236ww on - on 5239ww on off on 5237ww mom off mom 5238ww** on off mom 5232ww** on - mom iii ii i 2-3 1-2 5-6 4-5 5246ww on - on 5249ww on off on 5247ww mom off mom 5248ww** on off mom 5242ww** on - mom 5244ww* on on on 5244ww 1r* on on mom 5244ww 2r* mom on mom iii ii i 2-3 1-2 5-6 4-5 8-9 7-8 5256ww on - on 5259ww on off on 5257ww mom off mom 5258ww** on off mom 5252ww** on - mom model structure shown with standard lever (-13) * and ** : see notes next page. (.500) (.150) (.531) (.236) (.433) 24? (.118 dia) (.246 dia) (.043) (.222) (.275) (.200) (.039) (.150) (.500) (.200) (.062 dia) (.301) i ii iii 3.81 12.70 1.10 3.00 6.25 13.50 6.00 11.00 7.00 0.80 3.81 12.70 5.65 5.08 1.00 1.60 5.08 3.00 (.118) (.519) 13.20 3 2 1 13.20 (.519) 5.65 12.70 3.81 (.222) (.150) (.500) 6.25 3.00 (.246 dia) (.118 dia) 11.00 6.00 13.50 (.433) (.236) (.531) 24? 0.80 (.301) (.472) 5.08 (.200) 1.60 12.70 3.81 (.062 dia) (.500) (.150) (.043) 1.10 (.187) 12.00 i ii iii 4.75 (.118) 3.00 6 5 4 3 2 1 5.08 (.039) (.200) 1.00 (.187) 4.75 (.118 dia) (.246 dia) 3.00 6.25 (.515) 13.10 (.500) (.150) 3.81 12.70 (.283) 4.75 (.187) 1.10 (.043) (.649) (.150) (.500) 3.81 12.70 iii ii i 24? 7.20 16.50 (.031) 0.80 3.00 13.20 (.118) (.519) 1.00 (.039) (.200) 5.08 9 8 7 3 2 1 (.200) 5.08 (.062 dia) 1.60 4.75 (.187) (.492) 6.00 (.236) 12.50
apem www.apem.com a-41 5000 series t oggle switches - plain bushing right angle terminals - vertical : 5200ww - 5400ww a four pole iii ii i 2-3 1-2 5-6 4-5 8-9 7-8 11-12 10-11 5266ww on - on 5269ww on off on 5267ww mom off mom 5268ww** on off mom 5262ww** on - mom 5264ww* on on on 5264ww 1r* on on mom 5264ww 2r* mom on mom * function 4 : sp in dp case, dp in 4p case - specify ct or th connections, see end of catalogue. ** functions 2 and 8 : reversed connection available, consult factory. pcb mounting 5400ww models ?pin spacing 2,54 mm (.100) 1, 2, 3 and 4 pole configurations diagram as per 5200ww model for model structure numbers, refer to 5200ww models and replace 2 with 4. pc layout model structure 12.70 3.81 (.500) (.150) 6.25 3.00 (.246 dia) (.118 dia) 13.10 (.515) 7.20 (.283) 12.70 3.81 (.150) (.500) (.043) 1.10 (.834) (.187) 24? i ii iii (.031) 5.08 (.200) 0.80 4.75 21.20 (.519) (.118) (.039) 13.20 3.00 1.00 9 8 7 12 11 10 1.60 (.062 dia) 4.75 (.187) 5.08 (.200) 12.50 (.236) 6.00 (.492) (.259) 21.20 (.834) 16.50 (.649) 12.00 (.472) 7.00 (.275) 13.20 (.519) 6.60 sp dp 3p 4p 5.08 1.60 12.70 2.54 (.062 dia) (.200) (.500) (.100) (.100) (.500) (.062 dia) 2.54 12.70 1.60 1.60 12.70 2.54 (.062 dia) (.500) (.100) (.062 dia) 1.60 (.100) (.500) 2.54 12.70 (.200) 5.08 (.200) 5.08 (.200) 5.08 sp dp 3p 4p
a-42 apem www.apem.com 5000 series t oggle switches - plain bushing straight pc terminals - bracket mounting : 5200y a short bracket - width 15,75 (.620) - double pole : 5240y short bracket - width 15,75 (.620) - single pole : 5230y brackets reduce mechanical stress on solder joints and increase resistance to vibrations. bracket material : tin plated steel. ?epoxy sealed terminals standard 1and 2 pole configurations iii ii i 2-3 1-2 5236y b on - on 5239y b on off on 5237y b mom off mom 5238y b on off mom 5232y b on - mom model structure y - y6 y4 - y7 shown with standard lever (-13) iii ii i 2-3 1-2 5-6 4-5 5246y b on - on 5249y b on off on 5247y b mom off mom 5248y b on off mom 5242y b on - mom 5244y b* on on on 5244y 1r b* on on mom 5244y 2r b* mom on mom * function 4 : sp in dp case - specify ct or th connections, see end of catalogue. 1.10 (.043) 4.00 5.30 (.157) (.208) (.043) 1.10 (.334) (0.385) 9.80 8.50 24? (.125) (.620) (.275) (.531) (.220) (.511) (.161) 4.10 13.00 5.60 13.50 3.18 15.75 7.00 15.75 (.620) 3.18 (.125) (.185) 4.70 epoxy (.062 dia) 1.60 1 2 3 (.118 dia) (.246 dia) 6.25 3.00 0.40 (.015) (.046) 1.17 iii ii i (.620) 15.75 (.125) 3.18 15.75 3.18 (.620) (.125) 4.75 6.25 8.20 4.70 6.00 13.10 (.185) (.187) (.322) (.246 dia) (.118 dia) 24? (.236) (.515) iii (.472) (.511) (.185) 12.00 4.70 13.00 epoxy (.062 dia) 1.60 3 2 1 3.00 (.015) (.046) 0.40 1.17 ii i
apem www.apem.com a-43 5000 series t oggle switches - plain bushing straight pc terminals - bracket mounting : 5200y4 - y6 - y7 a t all bracket - width 19,05 (.750) : 5200y7 short bracket - width 19,05 (.750) : 5200y6 t all bracket - width 15,75 (.620) : 5200y4 iii ii i 2-3 1-2 5-6 4-5 single pole double pole 5236y7 b 5246y7 b on - on 5239y7 b 5249y7 b on off on 5237y7 b 5247y7 b mom off mom 5238y7 b 5248y7 b on off mom 5232y7 b 5242y7 b on - mom 5244y7 b* on on on 5244y7 1r b* on on mom 5244y7 2r b* mom on mom * function 4 : sp in dp case - specify ct or th connections, see end of catalogue. iii ii i 2-3 1-2 5-6 4-5 single pole double pole 5236y6 b 5246y6 b on - on 5239y6 b 5249y6 b on off on 5237y6 b 5247y6 b mom off mom 5238y6 b 5248y6 b on off mom 5232y6 b 5242y6 b on - mom 5244y6 b* on on on 5244y6 1r b* on on mom 5244y6 2r b* mom on mom iii ii i 2-3 1-2 5-6 4-5 single pole double pole 5236y4 b 5246y4 b on - on 5239y4 b 5249y4 b on off on 5237y4 b 5247y4 b mom off mom 5238y4 b 5248y4 b on off mom 5232y4 b 5242y4 b on - mom 5244y4 b* on on on 5244y4 1r b* on on mom 5244y4 2r b* mom on mom 16.00 (.629) (.515) (.236) 24? (.118 dia) (.246 dia) (.322) (.187) (.185) 13.10 6.00 4.70 8.20 3.00 6.25 4.75 4.70 (.185) (.204) 5.20 (.125) (.125) (.620) 3.18 15.75 3.18 (.125) 3.18 (.620) 15.75 3.18 (.125) 15.75 (.620) epoxy (.062 dia) 1.60 1 2 3 (.472) 12.00 0.40 (.015) (.046) 1.17 iii ii i (.250) (.750) (.515) (.236) (.511) 24? (.118 dia) (.246 dia) (.185) (.472) (.250) (.322) (.250) (.250) (.187) (.185) 4.70 13.00 13.10 6.00 4.70 6.35 19.05 8.20 6.25 6.35 12.00 4.75 6.35 6.35 1 2 3 (.750) 19.05 19.05 (.750) 4.70 (.185) epoxy 3.00 1.60 (.062 dia) 0.40 (.015) (.050) 1.27 iii ii i (.185) 4.70 (.750) 19.05 19.05 (.750) 6.35 6.35 4.75 6.35 6.25 8.20 19.05 6.35 4.70 6.00 13.10 (.185) (.187) (.250) (.250) (.322) (.250) (.246 dia) (.118 dia) 24? (.236) (.515) (.750) (.250) (.629) (.204) 5.20 16.00 epoxy (.062 dia) 1.60 3 2 1 3.00 12.00 (.472) (.015) 0.40 1.27 (.050) iii ii i

▲Up To Search▲

Price & Availability of 5062MTH1R

	To Download 5062MTH1R Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .